|
|
Post by cofreth on Oct 6, 2017 11:39:26 GMT 8
Any possibility to link the cam with Kerui security alarm host? Whenever alarm activated, it will then start a video recording?
|
|
mb93
New Member
Posts: 8 
|
Post by mb93 on Oct 10, 2017 4:43:14 GMT 8
Hi, I found the manual for a friend. So i can share it. You can download here. |
|
|
|
Post by chris on Oct 10, 2017 5:08:09 GMT 8
Any possibility to link the cam with Kerui security alarm host? Whenever alarm activated, it will then start a video recording? Not sure if it really works that way, but at least I can connect the N62 to my W1 app and don't seem to need another/different app. |
|
|
|
Post by cofreth on Oct 10, 2017 22:43:33 GMT 8
Hi, I found the manual for a friend. So i can share it. You can download here. I have that manual, it comes together with the cam, thanks. |
|
|
|
Post by cofreth on Oct 10, 2017 22:49:37 GMT 8
Any possibility to link the cam with Kerui security alarm host? Whenever alarm activated, it will then start a video recording? Not sure if it really works that way, but at least I can connect the N62 to my W1 app and don't seem to need another/different app. I can connect the cam thru Yoosee apps, but not on my W19 apps. As the yoosee apps required me to use alphanumeric passwords to complete the setup, but W19 apps remote monitoring detected my cam, but only have a numeric keypad for me to key in thd passwords. Thus, unable to complete the setup on W19 apps. |
|
|
|
Post by Russel on Oct 31, 2017 12:55:16 GMT 8
but only have a numeric keypad for me to key in thd passwords. Thus, unable to complete the setup on W19 apps. One reason I am completely turned off from any Camera that is accessible from the internet and doesn't have good security. I am just in the middle of upgrading my analogue system to digital. Most of the DVR boxes I have looked at are stupid uneditable username of 'Admin' no need for a hacker to guess it is always going to be ADMIN and passwords of 6 numerical characters. No IP logging, no failed login attempt blocking. All anyone has to do if use a port sniffing program find IP addresses find common ports that are open to cameras, then aim a password generator at the IP address and port and within a minute or 2 they will have access to your camera's and you'll never know they are watching. Plenty of youtube videos of people showing off other peoples cameras they easily have hacked. I have been looking at www.zoneminder.com as an option it's a big open source package community software tends to fix things properly instead of being focused on profit margins. |
|
aung
Junior Member
Posts: 19
|
Post by aung on Jan 12, 2018 19:46:01 GMT 8
Not sure if it really works that way, but at least I can connect the N62 to my W1 app and don't seem to need another/different app. I can connect the cam thru Yoosee apps, but not on my W19 apps. As the yoosee apps required me to use alphanumeric passwords to complete the setup, but W19 apps remote monitoring detected my cam, but only have a numeric keypad for me to key in thd passwords. Thus, unable to complete the setup on W19 apps. True, W 19 or W18 app accept only number for camera pw. YooSee asked pw to be alpha numeric. I added all of them in Kerui Smart App my.pcloud.com/publink/show?code=XZzKKp7ZLAuRIV2bpSmTO4zmwkq9pjSNOBU7. One in all Camera setting is available as well but pw is alpha numeric |
|
aung
Junior Member
Posts: 19
|
Post by aung on Jan 12, 2018 19:57:30 GMT 8
Any possibility to link the cam with Kerui security alarm host? Whenever alarm activated, it will then start a video recording? Yes, you can link. W18, W19 app accept to added camera but you need to use only number to set password. Camera setting is not available in those apps. YOu can change camera setting in Kerui Smart app ( you can add Kerui alaerm system here as well) or YooSee app ( Camera app) They both asked for Alpha-numeric pw. Whatever app you use , Camera DOES NOT TURN TO SENSOR which trigger the alarm to record video automatically. Product pages boasted that use N62 alone with sensor ot use with alarm system, camera will turn to the sensor which trigger alarm and record video automatically. It is not true.I have made a video and complain to seller. |
|
|
|
Post by Tibs on Jan 22, 2018 22:39:45 GMT 8
I've received the same answer from the Manufacturer that this is not possible. The sensors can be synced in same time with the Kerui alarm host and the IP camera (like for ex. N61, N62, KR-IPCZ05), so the user will receive alarm trigger from both units when some sensor is activated and that's it. No automation.
|
|
|
|
Post by cofreth on Jun 6, 2018 19:40:44 GMT 8
Yoosee old version can preset camera position, but not for the updated version.
|
|
