magnus
Junior Member
Posts: 11
|
Post by magnus on Sept 17, 2017 14:24:06 GMT 8
Hello!
Under the menu ”Sensor” there is a setting ”Ready to arm”, what does that do?
//Magnus
|
|
|
Post by Russel on Sept 26, 2017 10:17:34 GMT 8
Hello! Under the menu ”Sensor” there is a setting ”Ready to arm”, what does that do? //Magnus I only own a W1 and this setting is not in there so I can only guess. Maybe it is a way to disable/enable the sensor. ps I have just added the manual to the overview thread I did have a quick look through it but there is nothing in there about ready to arm that I could see
|
|
magnus
Junior Member
Posts: 11
|
Post by magnus on Oct 5, 2017 2:41:14 GMT 8
|
|
|
Post by cofreth on Oct 6, 2017 0:19:37 GMT 8
Hello! Under the menu ”Sensor” there is a setting ”Ready to arm”, what does that do? //Magnus It is a function from the host to check and make sure all windows & doors sensor are closed before arming the system. Upon finding one of your window is not close, the host will voice prompt xxx zone is open. If this function is being turn off, it will armed the system with that open door or windows.
|
|
magnus
Junior Member
Posts: 11
|
Post by magnus on Oct 11, 2017 2:33:59 GMT 8
Thanks Cofreth!
|
|
|
Post by ginandtonic on Oct 28, 2017 2:09:31 GMT 8
Thank you,
|
|
|
Post by Russel on Oct 31, 2017 12:20:55 GMT 8
It is a function from the host to check and make sure all windows & doors sensor are closed before arming the system. Upon finding one of your window is not close, the host will voice prompt xxx zone is open. If this function is being turn off, it will armed the system with that open door or windows. That is super awesome, coz it is feature that has been discussed before as a 'love to have'. I personally didn't think Kerui would go that far in their programming as to keep logs of detectors states. It is good to know they have.
|
|
|
Post by hubertius on Feb 16, 2018 5:27:44 GMT 8
Hi guys!
If I turn Ready to Arm on, I get zone 1 error eventhough the entrance door is closed.
Any ideas?
Cheers
|
|