cyrix
New Member
Posts: 3
|
Post by cyrix on May 23, 2019 16:01:21 GMT 8
I am no not able to turn off the disarm sound on the Wireless Siren. And the outdoor siren sounds so loud when disarming, that it is not possible to use it as is. It does not sound when arming and wired siren does not sound. Have turned off sound for all remote controls. Also did a factory reset, but still same problem:( It does not matter how I disarm(App, Remote, RFID, Panel), loud sound from outdoor siren. And it is only when disarming, not when arming.
Is this a bug in the W193 or is it possible to solve it?
|
|
|
Post by Russel on Jun 13, 2019 9:31:35 GMT 8
I had same issue with W1 when I started out, it drove me mad. On the 4 button keypad I believe one of the buttons is disarm without sound. From memory the way I stopped it happening this was going back and whether the setting is still there or not, but I think in the app it was under the remote control but that looks like it's been removed since then. I think the basis of their thinking was you had to change it on each keypad/fob. There is post here to keruizone.boards.net/thread/216/arm-disarm-beeps-sirenand my youtube video from 2017
|
|
cyrix
New Member
Posts: 3
|
Post by cyrix on Jun 17, 2019 17:12:06 GMT 8
The problem is that the setting is only removing the arming sound and not when disarming. For the wired siren, The setting removes sound both when arming and disarming. For now, I have turned of the outdoor siren:(
|
|
|
Post by Russel on Jun 18, 2019 9:43:10 GMT 8
Oh that sounds abit rubbish I only have W1 so I can't look at mine. I noticed on the Latest W1 app they have actually removed the 'Remote' section from the app and I haven't been able to see anywhere to disable the arm/disarm beep from the outdoor siren. Luckily I had already disabled mine in the previous app and it never turned back on.
|
|
pzam
New Member
Posts: 3
|
Post by pzam on Dec 30, 2019 17:26:57 GMT 8
This works on my W19 and SJ1 Wireless Solar Siren:
If you want to silence the beeping then do the following: on the control panel, select SENSORS and then REMOTE. Select a ZONE to "Add/Edit" and then turn "Sound" OFF.
If this doesn't work then re-pair the SJ1 with the panel by resetting the panel to Factory Settings first. I had to do this to get it working.
|
|
|
Post by onkytonk on Feb 21, 2020 9:20:09 GMT 8
I have a W193 with the J009 indoor siren and SJ1 solar siren. When I turn off the sound, it only disables the ARMING sound. I can't find anyway to disable the DISARM sound. This happens for both the SJ1 and J009.
I have tried resetting the W193 and sirens and the same problem occurs. I believe the issue is the W193 that is sending the signal when it shouldn't be.
Any suggestions please?
|
|
cyrix
New Member
Posts: 3
|
Post by cyrix on Mar 11, 2020 4:44:38 GMT 8
I have a W193 with the J009 indoor siren and SJ1 solar siren. When I turn off the sound, it only disables the ARMING sound. I can't find anyway to disable the DISARM sound. This happens for both the SJ1 and J009. I have tried resetting the W193 and sirens and the same problem occurs. I believe the issue is the W193 that is sending the signal when it shouldn't be. Any suggestions please? Exactly the same problem that I have. It must be a bug in W193. This problem is only affecting wireless sirens, it works fine for wired siren. I have turned off my outdoor siren due to this problem.
|
|