stef
Junior Member
Posts: 12
|
Post by stef on May 28, 2018 15:45:12 GMT 8
Hello,
When I have a detector that goes into low battery the siren is triggered, is there any way to remove the siren on low battery? I tried to change the Anti-tamper switch setting (p14 of the manual) but that does not change anything.
Thank you.
|
|
mb93
New Member
Posts: 8
|
Post by mb93 on May 30, 2018 2:46:51 GMT 8
|
|
|
Post by charltonfan1 on Mar 18, 2019 3:26:06 GMT 8
Found this on an Amazon review. Think it applies to low battery alarms on sensors also
After a lot of research I've discovered the well hidden and counter-intuitive setting which turns this function off. In order to do that you must go to System settings-->sound settings--> enter the number of the siren (0 in my case)--> siren sound OFF. This way the external siren will work as it should, except that it won't trigger the alarm if the battery dies. It also won't beep when arming/disarming it, which is also a plus if you don't want to annoy your neighbours every time you leave/come home.
|
|