|
Post by jpro1001 on Jul 20, 2017 13:38:22 GMT 8
Anyone know if there is a way to prevent arming if a door or window is open?
|
|
|
Post by Russel on Aug 20, 2017 13:54:44 GMT 8
Probably with other alarm systems, but I am pretty sure with Kerui they do not keep track of the sensors movements.
From what I experience the code is partitioned into 2 sides incoming triggers and the alarm side.
You operate the alarm side and if a trigger happens whilst it is armed then it goes off, if it isn't armed then nothing happens. That's about as complex as the product gets.
|
|
|
Post by cofreth on Nov 3, 2017 1:10:10 GMT 8
There is this settings known as Ready to Arm. If this function is being turn on, it will check if doors or windows are closed. If either a door or window is open, the host will voice prompt xxx zone is open to alert you.
|
|
|
Post by Russel on Nov 7, 2017 14:57:46 GMT 8
There is this settings known as Ready to Arm. If this function is being turn on, it will check if doors or windows are closed. If either a door or window is open, the host will voice prompt xxx zone is open to alert you. This is true. Not all units have the ready to arm function.
|
|
eric
New Member
Posts: 6
|
Post by eric on Feb 21, 2018 0:59:21 GMT 8
Are there any third party door sensors that have the ready to arm feature?
Looks like the the ADT sensors at my work have this feature. Suspect there's a version of those sensors which are two way and can respond to a ready to arm request from the base unit.
W10 had the ready to arm option which currently prevents arming as the door units I have installed can't reply with an armed status.
No guarantee we could add the sensors or the unit would handle them, but I'd like to try....
|
|
|
Post by dennis5pia on Apr 25, 2018 0:59:14 GMT 8
There is a feature called "illegal arming". It's supposed to prevent the system to be armed if a sensor is open. But it doesn't work at all. If you turn it on, the panel won't let you arm the system because it will tell you that "zone #**" is on, but no sensor is on.
|
|
|
Post by sifuconman on Oct 13, 2018 22:52:31 GMT 8
There is a feature called "illegal arming". It's supposed to prevent the system to be armed if a sensor is open. But it doesn't work at all. If you turn it on, the panel won't let you arm the system because it will tell you that "zone #**" is on, but no sensor is on. In the case of G18 this feature is called "Ready To Arm". Yes you right - this feature doesn't work as mentioned in your post. EDIT : The G18 manual mentioned that "Ready to Arm" must be turn on if you installed DO26 wireless door switch. May be it works with DO26 only ? DO25 didn't work in my case. Attachments:Doc1.docx (201.72 KB)
|
|
sero
New Member
Posts: 7
|
Post by sero on Dec 14, 2018 23:42:15 GMT 8
I have w20 and i have Model Number:D026 sensors! Have "REady to Arm" ON but still i can arm system ..no notification is sent that doors are open!!! If i select "Home Arm" - It says: "XX zone error" but no notification or anything!
Any news about this shitty product?
|
|