crms
New Member
Posts: 6
|
Post by crms on Aug 5, 2022 23:37:16 GMT 8
I've just vot a G18 alarm in France. Changing the language to English was the easy part.
But adding detectors as in 3.7.3 of the manual - my manual is also titled "KS100 GSM Alarm System".
Anyway, the voice prompt doesn't ask for zone number, line 2. On my old GSM alarm I had 2 zones - 1 was door perimeter with 5 sensors number 11 - 15. 2 was interior with 4 PIRs, 21 to 24.
The alarm the seemed to randomly allocated sensors to previous sensors which became a zone.
It is also a shame there doesn't appear to be a list of sensors and no way of renaming them.
I've tried a full factory reset but it didn't reset everything.
It seems that the manual has lost something in translation.
|
|
crms
New Member
Posts: 6
|
Post by crms on Aug 6, 2022 0:36:06 GMT 8
Right, finally sorted. Given each sensor its own zone - so I know which opening is alarming. Now just have to sort the home - normal and stay settings. I don't want the PIRs alarming, but do want openings. Just set a door sensor to Home Armed, but internal PIR activates when Stay Arm set??
|
|
crms
New Member
Posts: 6
|
Post by crms on Aug 6, 2022 4:48:47 GMT 8
Thanks to Magic Busy for the manual link. But 3.7.3 is still incorrect - there is no voice prompt to enter zone number. Lost in translation I guess.
|
|