Post by worka on Apr 21, 2021 10:29:04 GMT 8
I have two Kerui W18 here and connected them.
I just set second System to Remote Control learning, while connecting a Siren to the first System.
First System will send Remote Signal to not existing Siren and that Signal is received by the second System, which will regognise this Signal as a remote Control.
When activating the first System, it will send the ON Signal to second System (two times), when setting first System to Home armed or disarmed, it will send OFF Signal to second System (two times).
When first System is in Alarm state it will send SOS Signal to second System, so second System will go to Alarm state to.
You can use it to extend range of the System, or extend reliability because you can have two Receivers listening to every Sensor.
Or you are able to mute the activation and deactivation Sound of external Sirens, by connecting the Sirens to second System and disableing Sound in second System, for the Remote Control Number of first System, while you can still connect Smart Sockets as Siren to first System.
So smart Sockets will be Set ON when arming the System and set OFF when disarming, because first Systems will senden ON/Arm Signal on activation to sockets and second System, but second System would not send a Signal to the external Sirens on activation or deactivation to make them beep/chirp.
Maybe someone has even better ideas?
I just set second System to Remote Control learning, while connecting a Siren to the first System.
First System will send Remote Signal to not existing Siren and that Signal is received by the second System, which will regognise this Signal as a remote Control.
When activating the first System, it will send the ON Signal to second System (two times), when setting first System to Home armed or disarmed, it will send OFF Signal to second System (two times).
When first System is in Alarm state it will send SOS Signal to second System, so second System will go to Alarm state to.
You can use it to extend range of the System, or extend reliability because you can have two Receivers listening to every Sensor.
Or you are able to mute the activation and deactivation Sound of external Sirens, by connecting the Sirens to second System and disableing Sound in second System, for the Remote Control Number of first System, while you can still connect Smart Sockets as Siren to first System.
So smart Sockets will be Set ON when arming the System and set OFF when disarming, because first Systems will senden ON/Arm Signal on activation to sockets and second System, but second System would not send a Signal to the external Sirens on activation or deactivation to make them beep/chirp.
Maybe someone has even better ideas?