|
Post by sterob73 on Jan 17, 2019 5:29:56 GMT 8
Hi. I’ve recently installed a kerui g19 alarm system in my home. I’m having a problem with the pir settings in the entry room. When I enter my home with the alarm set, the door contact activates the 30 second delay to disarm. As I walk in the pir picks me up and actives the external siren. I have it set as follows:
Siren on: attribute Home event code burglar.
I’m not 100% sure what all the setting options are offering. My other alternative would be to move the pir to another part of the room.
Any help would be gratefully received.
Thanks
Stephen
|
|
booke02
Junior Member
Dissatisfied G193 owner
Posts: 24
|
Post by booke02 on Jan 17, 2019 5:53:47 GMT 8
Stephen,
I think that Burglar (or normal) means that the siren will sound as soon as any movement is detected.
The attribute "Home" means that that the sensor will not cause an alarm when the system is armed in home mode (sometimes also referred to as stay mode.) It will behave normally (i.e. cause an alert) when the system is armed in away mode.
Keith
|
|