How To: Pairing SJ1 Wireless Siren > G19 Host Control Panel

INSTRUCTIONS: Pairing the SJ1 Wireless Siren to the G19 Host Control Panel:
1. On the SJ1 Wireless Siren (refer to the Back Elevation diagram in the Operation Instruction leaflet):
Switch on the Siren by pushing the "Battery switch" to the ON position.
Press the "Volume/Set" button for 3 seconds. The Siren will beep once and the 3 Blue LEDs will light up on the Front View.
The Siren is now in PAIR mode and ready to be paired up with the G19 Control Panel.
Place the Siren Face up on a hard surface (so the Tamper button is depressed).
2. On the G19 Control Panel (refer to the Operation Instruction booklet):
Press the "Key Menu/Delete" button.
Select "Sensors"
Select "Wireless Siren"
Press the"OK" button
A series of beeps will occur on the Siren.
Press the "Key Back/Keyboard Lock" button.
3. Your G19 should now be paired to the Siren.
When you pick up the Siren the Tamper button will cause it to alarm.
You need to press the "Battery Switch" to the OFF position.
Turn it back ON when you need to position the Siren on the wall.